APCO Aviation Contact Us Site Map Home

Split Legs Paramotor Harness

LOW Hook-In points

PM harness gravity

Here it comes - the revolutionary concept of Split Legs Paramotor harness finally is a reality.
We at APCO are proud to have brought to life an idea which has been in the air for a long time - a split-legs paramotor harness which would have no seatplate, weighing absolute minimum, but in terms of comfort and safety would exceed the standard classic paramotor harness.

Split legs concept for Paramotor flying opens new possibilities and sets new standard which will be quickly followed by many other brands.
Giving up on seatplate immediately allows for reduction of the weight by a half kilo at least. Absence of hard seatplate, makes it easier to create a design where power unit is closer to the body. Split legs seating holds much greater potential for improved weight shift - Great for Slalom flying.

PM harness gravity

Effortless takeoff and landing with gravity center moved closer to the back, makes the unit feel lighter.
No seatplate and Split legs arrangement permits undisturbed take-off run. No hard pieces bumping your thighs on launch which makes it way easier and far more comfortable.

Surprisingly, contradicting common belief, APCO designers were able to create a harness which is comfortable, above expectations and makes handling of the power unit on take-off and in flight far simpler and effortless.
The design is rich in options, attentive to the smallest details, with striking appearance of haute couture creation.

Only top quality materials were used, aiming for the best possible finish, comfort and style.

Available in 2 sizes accommodating most pilots. see sizing table »


  • Super Light weight - under 1.5 Kg.
  • Fits most frames with low hook in points
  • Zipped on, side mounted Emergency parachute compartment specifically designed for this harness and is interchangeable with a zipped on side pocket.
  • Available in 2 sizes S/M and L/XL - see sizing table »
  • Size adjustment using a back extension zipper accommodating most pilots
  • Super light ventilated ergonomic back support with specially designed foam to isolate engine vibration.
  • Optional Ball bearing Pulley assembley for accelerator
  • Optional Mirror Kit
  • Extra wide 3D padded shoulder straps for maximum load spreading and carrying comfort.
  • Split leg design for undisturbed running and easier body transition during takeoff and landing
  • Integrated emergency parachute connection loops.
  • New lightweight quick lock buckles specially selected for split legs design - safe and easy to operate.
  • Cloth - high density, strong and durable, but lightweight.
  • All webbing adjusters - lightweight, top grade aluminium, easy to operate.
  • Ergonomic breathable back support
  • Double position main attachment loop for side bar.
  • Ball bearing Pulley assembly for accelerator - minimal friction (optional)
  • Loop for pull start bungy cord on both of the shoulder straps.
  • New look high tech cloth
SLT PM Low Split-Legs  Hook-In harness featuresenlarge

* Optional features

Frame Installation

SLT PM Low Split-Legs  Hook-In harness featuresenlarge


Split legs PM harness :: Low Hook-in points 1.500 [Kg]
Back Vibration Isolating foam (removable) 0.090 [Kg]

see weight table »


Air Bag

APCO's range of its world famous MayDay parachute, compatible with the purpose designed Emergency parachute compartment which can be Zipped on and off either side of the harness and is interchangeable with a zipped on Pocket.

Optional Airbag will provide additional protection in case of impact with the ground.
More information is available in the accessories section


The Split Legs paramotor harness is available in 2 standard colors - All Black with orange or green trim.

SLT PM Low Hook-In harness


The Split Legs Paramotor Harness is available in 2 sizes and with a zipper extender will accommodate most pilots

  • 43500 S/M Split Legs Low Hook-In PM (up to 185 cm)
  • 43510 - L/XL Split Legs Low Hook-In PM (185 cm and up)
  • 80039 Zipped on Side rescue container
  • 80038 Zipped on Side pocket
  • 43107C - Ball bearing pulley assembly, ready to install (sold per piece)


80048: Zipped On Paramotor Airbag for Split Leg harness
Self-inflatable and superlight, adds substantial additional protection in the case of an accident.

80039: Zipped on Emergency Parachute compartment for Split Legs harnesses
Designed to fit any Apco Mayday, from 16 SLT up to Mayday 20 standard version. Large deployment handle and safe, visible side location on the harness. Can be zipped onto either side of the harness.

80038: Zipped on Side Pocket
The same pocket can be zipped onto either side, depending on pilot preference.

80031: Paramotor Harness Mirror Kit

Carabiners for harnesses:
To get more information view our harness accessories page »

42024: Universal harness Bridle
Built from 20mm. soft touch Polyester webbing - 2,200 [kg] MBL
Allows connection to the Mayday with no metal links.
(sold per piece)

43107C: Ball bearing Pulleys assembly
Pulley assembly, ready to install with stainless steel ball bearings, allowing the lowest possible friction - big improvement when used for Speed system on the glider and/or harness. (sold per piece)

80026: Paramotor container (size S) for Mayday 16SLT and 18SLT
The best made, best looking, universal emergency parachute container designed to fit most frames, offering easy operation, safe deployment and convenient location.

80025: Paramotor container (size L) for Mayday 16/18/20/Bi, 16/18/20LT, 20SLT, GMD/GMD SLT
The best made, best looking, universal emergency parachute container designed to fit most frames, offering easy operation, safe deployment and convenient location.

81155SLT: External Container for Mayday LT and SLT

80053: Flight Panel (Deck) - Top part
3 parts inovative cockpit from APCO

80054: Bottom Emergency parachute Front container - flight deck compatible
zipped on emergency parachute container

80052: Bottom Ballast Bag - flight deck compatible, zipped on!
Designed to hold APCO's 9L Liquipak inner ballast bag.
(ordered separately :: code:21000)

44003: Radio Pocket one size
Convenient and safe casing for your radio
Dimensions: 170 x 60 x 30 mm

80015: Mayday Front Container
Can be fitted to any certified harness on the market today.
Download the Manual »

The right to change prices, specifications or equipment at any time without notice is reserved