Split Leg Harness with HIGH Hook-In Points

Paramotor Harness

Here it comes – the revolutionary concept – Split Leg Paramotor harness – finally a reality!
We at APCO are proud to have brought to life an idea which has been in the air for a long time – a split-legs paramotor harness which would have no seat-plate, weighing absolute minimum, but in terms of comfort and safety would exceed the standard classic paramotor harness.


    Split Legs

    The Split-Leg concept for Paramotor flying opens up new possibilities and sets a new standard, which if fast being followed by many other brands.
    Giving up on the seat plate immediately allows for reduction of the weight by a half kilo at least. Absence of hard seat plate, makes it easier to create a design where the power is closer to the body (Less torque effect). Split leg seating allows for improved weight shift  steering, which is great for anyone from beginners to slalom racers.

    CG - Center of Gravity

    Effortless takeoff and landing with gravity center moved closer to the back, makes the unit feel lighter.
    No seatplate and Split legs arrangement permits undisturbed take-off run. No hard pieces bumping your thighs on launch which makes it way easier and far more comfortable.

    Surprisingly, contradicting common belief, APCO designers were able to create a harness which is comfortable, above expectations and makes handling of the power unit on take-off and in flight far simpler and effortless.
    The design is rich in options, attentive to the smallest details, with striking appearance of haute couture creation.

    Only top quality materials were used, aiming for the best possible finish, comfort and style.

    Available in 2 sizes accommodating most pilots.

    • Super Light weight – under 1.5 Kg.
    • Fits most frames with high hook in points
    • Super light ventilated ergonomic back support with specially designed foam to isolate engine vibration.
    • Optional Mirror Kit
    • Extra wide 3D padded shoulder straps for maximum load spreading and carrying comfort.
    • Split leg design for undisturbed running and easier body transition during takeoff and landing
    • Integrated emergency parachute connection loops.
    • New lightweight quick lock buckles specially selected for split legs design – safe and easy to operate.
    • Cloth – high density, strong and durable, but lightweight.
    • All webbing adjusters – lightweight, top grade aluminium, easy to operate.
    • Ergonomic breathable back support
    • Double position main attachment loop for side bar.
    • Loop for pull start bungey cord on both of the shoulder straps.
    Harness1.500 [Kg]1.500 [Kg]
    Back Vibration Isolating foam (removable)0.090 [Kg]0.090 [Kg]
    In-House Load Tested


    The Split Legs paramotor harness is available in 2 standard colors: All Black, with orange or green trim.

    APCO’s range of its world famous MayDay parachute, compatible with the purpose designed Emergency parachute compartment which can be Zipped on and off either side of the harness and is interchangeable with a zip-on Pocket.

    Optional Airbag will provide additional protection in case of impact with the ground.

    Pilot Protection

    The optional airbag provides additional protection in case of impact with the ground.
    More information is available in the accessories section

    Reserve System

    The Optional zip-on side mounted reserve container system for this harness integrates seamlessly into your setup, and provides peace of mind knowing you are flying with a rescue system.

    Frequently Asked Questions:

    Send us your questions: Contact us

    Optional Accessories



    Harnesses – Sizing Table

    HarnessSizeCodeHarness Weight (kg)Pilot Size (cm)Back Length (mm) - ASeat Length (mm) - BSeat Width (mm) - CDist. between Karabiners (mm)- DSupported Back (mm) - EHook-in Height (mm) - FPod Length - G
    First IIIMultisize with
    zipper expander
    Hikeone size470301.300160 to 190610430230 x 2295 - 490320420
    Chairbag Integral Vone size460302.950160-185700390380385 - 575450430
    RitmaS/M450503.200Up to 170680400390420 - 615360420
    RitmaL/XL451003.200170-185750435400420 - 615400415
    RitmaXXL451503.200180 and up750435400420 - 615400405
    Spark IIS/M431024.550Up to 170740370350375 - 575400390
    Spark IIL/XL432024.600170-185775410390375 - 575420415
    Spark IIXXL433024.700180 and up790470400375 - 575420440
    Swift RaceM/L446105.950up to 190640410320395 - 540360440900 - 1000
    Swift RaceXL446206.150185 and up700460340360 - 5353704801000 - 1100
    Swift SportM/L446305.310up to 190640410320395 - 540360440900 - 1000
    Swift SportL/XL446355.510185 and up700460340360 - 5353704801000 - 1100
    Swift ZeroM/L446404910up to 190640410320395 - 540360440900 - 1000
    Swift ZeroL/XL446455.110185 and up700460340360 - 5353704801000 - 1100
    Tandem Pilot Harnessone size424003.500Up to 195
    Tandem Passenger Harnessone size425002.700a wide range
    of passenger sizes
    Split Legs Paramotor
    HIGH Hook-In points
    S/M with
    zipper extender
    434001.500Up to 185
    Split Legs Paramotor
    HIGH Hook-In points
    L/XL with
    zipper extender
    434101.500185 and up
    Split Legs Paramotor
    LOW Hook-In points
    S/M with
    zipper extender
    435001.500Up to 185
    Split Legs Paramotor
    LOW Hook-In points
    L/XL with
    zipper extender
    435101.500180 and up
    Universal ParamotorMultisize with
    zipper extender
    410152.700Up to 190
    SLT Paramotor Harness
    High Hook-Up points
    Multisize with
    zipper extender
    280152.000Up to 190
    SLT Paramotor Harness
    Low Hook-Up points
    Multisize with
    zipper extender
    4204151.980Up to 190
    Trike Pilotone size491002.850160-190
    Trike Passengerone size492502.100160-190

    The Split Legs Paramotor Harness is available in 2 sizes and with a zipper extender, which accommodates most pilots

    • 43400    – S/M Split Legs High Hook-In PM (up to 185 cm)
    • 43410    – L/XL Split Legs High Hook-In PM (185 cm and up)
    • 80039    – Zipped on Side rescue container
    • 80038    – Zipped on Side pocket
    • 43107C – Ball bearing pulley assembly, ready to install (sold per piece)