80041: Safety Strap Short 12mm. Dyneema for Low swing arms

$44.00

Rated 1,700 [kg] MBL.
Length end to end: 350 [mm]

Designed for use on Apco SLT MkII Harnesses.
Intended for Low swing arms (PAP, PXP, Kangook, Flyproducts. etc.)

Price for set of 2!

Categories: , SKU: 80041x2

Description

Rated 1,700 [kg] MBL.
Length end to end: 350 [mm]

Designed for use on Apco SLT MKII Harnesses and to be coupled with the Figure 8 connection (Code: 80049) or with Carabiner Loop (Code: 44704)
Intended for Low swing arms type paramotors (PAP, PXP, Kangook, Flyproducts. etc.)
The Safety straps back up the pilot in case of failure of the side arm.
Contrary to other solutions on the market, they are connected to the seatboard at the Center of Gravity, to retain the same balanced sitting position in case of side arm failure.

Notes to ensure you have the correct setup:

Always do a hang check prior to flight.

If your Safety webbing is too short:

  • It will limit the side arm range of movement, reducing weight shift ability.
  • It will make it harder to get into the seat after takeoff.
  • It may alter the Hang / Thrust Angle

If your Safety webbing is too long:

  • In case of asymmetric arm failure, there will be a large difference in carabiner heights between the 2 sides, leading to a dangerous weight shift turn.

You may also like…